RBQ licence: 5815-0137-01

Proud partners:CAA Habitation recommendedCMEQ master electrician

info@stmelectrique.ca(438) 542-7304

Home › Guides › EV chargers

Tesla Wall Connector installation

The circuit Tesla requires for its Wall Connector, the models listed for Écorecharge, and what a master electrician checks at your home before installing it.

Get a quote

By the master electricians of STM-ÉlectriqueRBQ licence 5815-0137-01Sources checked on November 13, 2026

In short

We install Tesla Wall Connector chargers, as well as FLO, EVduty, Wallbox and ChargePoint chargers.

  • For full power, Tesla asks for a standard double-pole 60 A breaker: the Wall Connector then delivers 48 A, or 11.5 kW.
  • The Wall Connector and the Universal Wall Connector are both on the list of chargers eligible for Écorecharge read on November 13, 2026.
  • For its model 1457768, ground fault protection is built in: Tesla’s 2020 manual says not to install a GFCI breaker.
  • Before installation, we calculate the house’s load, charger included.
Jump to a section8
  1. The two models
  2. The circuit Tesla asks for
  3. Before installation
  4. Several Wall Connectors
  5. Écorecharge
  6. The warranty
  7. Carbon credits
  8. Frequently asked questions

The two models

Two 3rd-generation Wall Connectors each have their own North American installation manual.

Wall ConnectorUniversal Wall Connector
Part number14577681734412
ConnectorNACSNACS or J1772
Output current12 to 48 A12 to 48 A
Cable7.3 m7.3 m
EnclosureType 3R, IP54Type 3R, IP 54
CertificationcULusETL/cETL
ÉcorechargeEligible, hardwiredEligible, hardwired

Both have 2.4 GHz Wi-Fi. According to its manual, model 1457768 uses it to communicate with your router, the vehicle and other Wall Connectors.

The circuit Tesla asks for

For maximum power, Tesla asks for a standard double-pole 60 A breaker, for either model.

The breaker size is programmed during commissioning: the Wall Connector then sets its output current. Here is Tesla’s table for model 1457768, at 240 V:

BreakerMaximum outputPower
60 A48 A11.5 kW
50 A40 A9.6 kW
40 A32 A7.6 kW
30 A24 A5.7 kW
20 A16 A3.8 kW

A smaller circuit is therefore possible: the charger simply charges more slowly.

The Wall Connector includes its own ground fault protection (CCID20). The 2020 manual for model 1457768 says so plainly: do not install a GFCI breaker.

What we check before installation

Before adding a 60 A circuit, we do the house’s load calculation, charger included: the charger is added as is, with a load controller, or after a capacity increase.

That same calculation sets the charger’s actual current: Tesla’s table lets you go down to 40 A or less when the service entrance can’t handle 60 A.

Tesla rates the enclosure Type 3R and IP54, for temperatures from -30 °C to 50 °C.

If your city requires a permit, we apply for it for you.

The price of the installation depends on your setup: it is given in the quote, written and free of charge.

Several Wall Connectors

Two cars, one service entrance? Tesla’s power sharing links up to 6 Wall Connectors at the same site, through unit-to-unit Wi-Fi.

According to the Universal model’s manual, the total current of grouped chargers never exceeds the power allocated to the site.

Écorecharge

Écorecharge refunds $600 on the price of a connected charger on the official list, never on the installation (program read on October 11, 2026).

The Wall Connector (1457768) and the Universal Wall Connector (1734412) are both on that list, as wall-mounted, hardwired, connected chargers.

The list changes: the file read on November 13, 2026 had been modified that same day. Check your exact model before buying.

Only distributors and manufacturers can have a model added to the list.

The full conditions are in our guide to the Québec EV charger rebate.

The warranty

The Wall Connector’s warranty is Tesla’s, the manufacturer’s: 48 months for personal use, 12 months for commercial use.

For Tesla, any use other than personal charging at a single-family home counts as commercial.

A Wall Connector to install?

We calculate the house’s load, then set the circuit size; the price is written in the quote.

Send my quote request

Carbon credits

The Club Roulez Électrique names Tesla chargers, in beta, among those it accepts for its points.

Who gets these credits and how much programs pay: see our guide to EV charger carbon credits.

Frequently asked questions

What breaker does a Wall Connector need?

For the full 11.5 kW, Tesla asks for a standard double-pole 60 A breaker. A smaller size is allowed, with slower charging.

Is the Wall Connector eligible for Écorecharge?

Yes: models 1457768 and 1734412 are on the list read on November 13, 2026. The $600 lump sum covers the charger only (program read on October 11, 2026).

Do I need a GFCI breaker?

For model 1457768, no: according to Tesla’s 2020 manual, protection is built in and a GFCI breaker must not be installed. For the Universal model, we follow its own manual.

Can two Wall Connectors share the same service entrance?

Yes, with Tesla’s power sharing: up to 6 chargers at one site, without exceeding the allocated power. The load calculation sets that power.

Can a Wall Connector charge a brand other than Tesla?

The Universal Wall Connector comes with an NACS or J1772 connector, according to the Écorecharge list; model 1457768 is NACS only.

What protection does the enclosure offer?

Tesla rates it Type 3R and IP54, for temperatures from -30 °C to 50 °C.

A Wall Connector to install?

We calculate the house’s load, set the circuit according to Tesla’s table, and the price is written before the work.

4.9 from 469 Google reviews · RBQ licence 5815-0137-01 · CMEQ members · Free detailed quote

Get a quote: EV charger

EN - Service request (English service pages)